You are here: Front page Plans for towns and settlements Subarea plans Adopted 1200-B10

1200-B10  Tinussaraaq

Location – town/settlement
Ilulissat

Purpose
Areas for industry and ports

Specific use
Areas for industry and ports

Use
The area is to be used for activities within office, contractors, industry, warehouses, skilled trade, workshop, production, transport and storage, as well as port purposes involving dock and pier facilities, terminal functions and similar port facilities. The offshore area may be used for anchoring and mooring. Within the area, technical facilities supplying the area may be established. The design and location of the facilities are to consider the buildings and the unbuilt areas

Current conditions
The area covers an area of some 20 ha

Building provisions
Prior to constructing new buildings, a complete plan is to be prepared for the entire area, which determines the type, scope and location of buildings as well as detailed provisions for the area’s development

Remaining available space
The area has 100,000 m² of available space, depending on the final layout of the buildings. Once the abovementioned building potential has been utilised, the area is considered fully developed without any available space in the area.

Traffic service and utilities
Road access to the area is to be from Mittarfimmut Aqqutaa

Listed, protected and preservation-worthy features
No special provisions

Regulated zones
Regulated zones exist around the airport in the shape of obstacle limitation surfaces that consist of partly a horizontal surface and a conical surface, partly approach and take-off surfaces in continuation of the runway.
The area is located under the airport’s obstacle limitation surface, and is covered by the horizontal surface, where buildings and other facilities cannot be established higher than level 73.0 metres and roads no higher than level 67.0 metres.
The area is located under the obstacle limitation surface at the airport and is covered by approach and take-off surfaces. The maximum ridge level of buildings and facilities and the construction level of roads are variable and depend on the distance to the runway and a right-angled distance from the centre line.

Special provisions
Utilising this area by establishing buildings and facilities presumes that the existing use for recreational huts has ceased.
The necessary water areas may be filled in. The filling work is to result in a horizontal area, and be carried out according to an overall plan to be agreed on during detailed planning

Qaasuitsup Kommunia · Postboks 1023 · 3952 Ilulissat · Grønland · www.qaasuitsup.gl · E-mail: plan@qaasuitsup.gl · Tlf.: +299 947800
Last edited 23-5-2017