You are here: Front page Plans for towns and settlements Subarea plans Adopted 1504-B01

1504-B01  Port

Location – town/settlement
Saattut

Purpose
Areas for industry and ports

Specific use
Areas for industry and ports

Use
The area is to be used for activities within office, contractors, industry, warehouses, skilled trade, workshop, production and transport as well as port purposes involving dock and pier facilities, terminal functions and similar port facilities. The offshore area may be used for anchoring and mooring

Current conditions
The area covers an area of some 8 ha

Building provisions
New buildings are to have a maximum height of 11 metres
The necessary off shore areas may be filled in. When finished, the filled area must be level.

Remaining available space
The area has 4,500 m² of available space, depending on the final layout of the buildings. Once the abovementioned building potential has been utilised, the area has a remaining space of 3,654 m².

Traffic service and utilities
From the area, access is to be provided to the other areas and functions in the settlement by means of the existing system of wheel tracks and paths

Listed, protected and preservation-worthy features
No special provisions

Regulated zones
The area is covered by the tank facility’s safety zone. The safety zone has a radius of 20 metres from the outer limit of the tank facility. This part of the area cannot be developed or in any other way be used contrary to the safety zone provisions.
The area is located under the obstacle limitation surface at the heliport (overflight area and transition surface), where the maximum rigde height of buildings and facilities varies with a positive slope away from the start and landing area.

Special provisions
No special provisions

Qaasuitsup Kommunia · Postboks 1023 · 3952 Ilulissat · Grønland · www.qaasuitsup.gl · E-mail: plan@qaasuitsup.gl · Tlf.: +299 947800
Last edited 25-8-2017