You are here: Front page Plans for towns and settlements Subarea plans Adopted 1600-B08

1600-B08  Sarpinat (Langø)

Location – town/settlement
Upernavik

Purpose
Areas for industry and ports

Specific use
Areas for industry and ports

Use
The area is to be used for activities within office, contractors, industry, warehouses, skilled trade, workshop, production and transport as well as port purposes involving dock and pier facilities, terminal functions and similar port facilities. The offshore area may be used for anchoring and mooring The area may also be used for storage (not landfill, dump etc.). Within the area, technical facilities supplying the area may be established. The design and location of the facilities are to consider the buildings and the unbuilt areas

Current conditions
The area covers an area of some 344 ha

Building provisions
Prior to constructing new buildings, a complete plan is to be prepared for the entire area, which determines the type, scope and location of buildings as well as detailed provisions for the area’s development

Remaining available space
The area has 1,720,000 m² of available space, depending on the final layout of the buildings. Once the abovementioned building potential has been utilised, the area is considered fully developed without any available space in the area.

Traffic service and utilities
Access to the road system can be established by constructing an aerial cableway from Akia Island to Upernavik

Listed, protected and preservation-worthy features
No special provisions

Regulated zones
Regulated zones exist around the airport in the shape of obstacle limitation surfaces that consist of partly a horizontal surface and a conical surface, partly approach and take-off surfaces in continuation of the runway.
The area is located under the airport’s obstacle limitation surface, and is covered by the horizontal surface, where buildings and other facilities cannot be established higher than level 171.0 metres and roads no higher than level 165.0 metres.
The area is located under the airport’s obstacle limitation surface, and is covered by the conical surface, where the maximum ridge level of buildings and facilities is variable, having a positive slope away from the outer limit of the horizontal surface.

Special provisions
No special provisions

Qaasuitsup Kommunia · Postboks 1023 · 3952 Ilulissat · Grønland · www.qaasuitsup.gl · E-mail: plan@qaasuitsup.gl · Tlf.: +299 947800
Last edited 23-5-2017